|
In the third step of the Cutting Project
you will specify the cutting order of the Blocks, the Foam block size and the
placement of each block inside the Foam. If you selected multiple Blocks they
will stacked and cut starting from the Upper one:
You can view the 3D simulation of the cut of all blocks, to verify if all
the cutting job works the way you like:
You can view the 3D simulation of the Side Shaping cut of all blocks. The side shaping cut is a separate cutting job to cut at the right size and shape
the root/tip sides of each block. A correct angle will also be applied to the sides, taking care of the specified dihedral values
|
