DevFus Foam by the devCad Team   DevFus Foam, the new application to draw and cut foam fuselages Using DevFus Cam you can create in a very simple way a fuselage drawing The Project Wizard will drive you to draw the fuselage using a step by step approach. To draw the fuselage Side and Top view you can for example adjust the Outlines to follow a scanned image of the fuselage:  You can have also the 3D View of the fuselage, but no 3D drawing skill is required! See below an example, where you can see the different foam blocks of the fuselage:  You can then use 2 different wizards to create in a simple way the cutting files for a 4 axis CNC hot wire foam cutting machine. Each wizard will cut the foam using a different approach. The cutting files can be created using GCode, DAT, DXF or Hpgl/PLT files. You can also simulate the cutting job using a 3D cutting emulator, see the picture below: You can also cut the formers by a CNC milling machine, see the picture below of the milling preview offered but the simulator. This can be useful to add formers or to uset them as templates to cut the foam by a manual hot wire bow Try devFus Foam, some fuselage examples are included, so you can learn how easy is to create your own fuselages taking a look at them. A step by step help file is also included To download devFus Foam see the Download section of the web site. To get a license of devFus Foam see the Prices section of the web site.