|
|||||||||||||||
|
SCALE
(Command)
|
|||||||||||||||
|
|||||||||||||||
|
|||||||||||||||
|
SCALE
(Command)
|
|||||||||||||||
|
|||||||||||||||
It enlarges or reduces the selected objects proportionally in the X, Y directions
Modify
toolbar: 
Menu
: Modify
Scale
Command
line: SCALE
Select the objects to scale, Then press Enter to confirm or Esc to delete.... Use an object selection method and press ENTER At the end of the operation
Specify scale center: Specify a point
The specified scale center identifies the point that remains in the same location when the selected objects change size (and thus move away from the stationary base point)
Specify scale factor or [Copy/Reference]: Specify a scale, enter C or R
|
It multiplies the dimensions of the selected objects by the specified scale. A scale factor greater than 1 enlarges the objects. A scale factor between 0 and 1 shrinks the objects. It is also possible to drag the cursor to enlarge or shrink the object. |
|
It creates a copy of the selected objects for scaling. |
|
Scales the selected objects according to a reference length and a specified new length. Specify reference length <1>: Specify a starting length from which the selected objects can be scaled or specify 2 points Specify new length or [Points]: Specify a final length from which the selected objects can be scaled, or enter P to define a length with two points. |
